Warning: include(/home/detroita/public_html/libraries/joomla/cache/dir.php) [function.include]: failed to open stream: No such file or directory in /home/detroita/public_html/index.php on line 13

Warning: include() [function.include]: Failed opening '/home/detroita/public_html/libraries/joomla/cache/dir.php' for inclusion (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/detroita/public_html/index.php on line 13

Warning: include(/home/detroita/public_html/components/com_weblinks/helpers/alias.php) [function.include]: failed to open stream: No such file or directory in /home/detroita/public_html/index.php on line 16

Warning: include() [function.include]: Failed opening '/home/detroita/public_html/components/com_weblinks/helpers/alias.php' for inclusion (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/detroita/public_html/index.php on line 16

Warning: include(/home/detroita/public_html/templates/rt_kinetic_j15/custom/global.php) [function.include]: failed to open stream: No such file or directory in /home/detroita/public_html/index.php on line 19

Warning: include() [function.include]: Failed opening '/home/detroita/public_html/templates/rt_kinetic_j15/custom/global.php' for inclusion (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/detroita/public_html/index.php on line 19

Warning: session_start() [function.session-start]: Cannot send session cookie - headers already sent by (output started at /home/detroita/public_html/index.php:13) in /home/detroita/public_html/libraries/joomla/session/session.php on line 423

Warning: session_start() [function.session-start]: Cannot send session cache limiter - headers already sent (output started at /home/detroita/public_html/index.php:13) in /home/detroita/public_html/libraries/joomla/session/session.php on line 423

Warning: Cannot modify header information - headers already sent by (output started at /home/detroita/public_html/index.php:13) in /home/detroita/public_html/libraries/joomla/session/session.php on line 426
Detroit Air - Administrator

Administrator

Administrator

Blower Repair

We repair the following manufactures blowers and vacuum pumps  Roots, Lamson, Hoffman, M/D, Souterbilt,

(Blower Packages) We can design and build A blower or vacuum package to your requirements. (Sizing) We use the Roots selection program to make sure you get the most efficient blower for your application. (Engineering) We can assist in the proper equipment for your waste water treatment plant. Stoddard goes under accessories.

Blower Oil

After extensive life testing on rotary lobe blowers, Dreser ROOTS™  introduced a special blend, high-temperature, (polyalphaolefin based) synthetic lubricating oil for ROOTS™  Blowers and Vacuum Pumps in 1990.

Benefits include:

  • High Oxidation Stability - Contains oxidation-resistant additives that mean longer oil life and fewer oil changes. ROOTS™  synthetic lubricating oil excels in ASTM oxidation tests, also in the field, where it counts. Longer oil life means lower expenditure, and greater conservation.
  • Rapid Separation from Water - Promotes prolonged bearing life.
  • Excellent Corrosion Protection - Contains synthetic corrosion inhibitors.
  • Protects during operation and acts as a preservative during shut down.
  • Synthetic Solvency - Keeps equipment clean.
  • Ashless - Keeps equipment free from metallic ash deposits.
  • Compatible with Seals - Has excellent compatibility with seals.
  • Blower Protection - Protects blower through a wide range of operating temperatures.
  • Pour Point from  -40°F/ -40°C. Flash Point at 500°F/ 260°C.
  • Range of Use - ROOTS™  synthetic lubricating oil can be used in any blower application or operating environment.
  • High Film Strength - ROOTS™  synthetic lubricating oil carries up to 700% greater loads than other mineral and synthetic oils.
  • Low Friction - Extremely low coefficient of friction proven to save energy over conventional oils.
  • Compatibility With Other Oils - ROOTS™  synthetic lubricating oil is compatible with, and can be mixed with, other mineral oils and most other synthetic oils  No special cleaning is required at change out for blowers previously running on mineral oil. NOTE: It is NOT compatible with silicone or glycol synthetics.
  • ISO Grade Availability - Available in ISO Grade 150, 220, or 320, and AGMA grade 4, 5, or 6.
  • Special Grade Availability - FOOD grade ROOTS™  synthetic lubricating oil is available upon request.
  • Container Sizes - Available in one-quart containers, 12-quart case, 5-gallon pail, or 55 gallon drum.

Today's ROOTS™  blowers and exhausters are designed and built with the same attention to detail that has firmly established the Dresser ROOTS reputation for reliability, quality and technical excellence over the past 150 years.

ROOTS™  synthetic lubricating oils are made with the same quality and technical excellence standards to meet the highest specifications required for maximum performance.

The Advantage

Detroit Air Compressor is very proud of its Preventative Maintenance Program.

The paradigm of measuring compressor service requirements based upon time only has been replaced by adding the elements that affect the air compressor’s operation and performance. This system developed by Detroit Air Compressor has saved many customers thousands of dollars in avoidable repairs.

The DACO ADVANTAGE PROGRAM:

  • Scheduled visits based upon site conditions
  • Oil samples taken at prescribed intervals
  • Compressor maintenance is performed per manufacturer’s recommendations
  • Dedicated service technician staff
  • All service calls received and dispatched 24 hours a day/7 days per week

This method has REDUCED maintenance costs for many of our customers. Call today to learn about this energy saving economical service!

Be cautious of “all expenses paid” programs offered by some of our competitors! Our experience has shown that these programs are expensive and benefit the seller, not the buyer. Be aware of proprietary remote monitoring systems that allow ONLY the selling company access to the information. Some customers have been charged high access fees for this “service”, only to be told that they owe additional fees to have the service activated. The end result… the system was never initialized.

What benefit does the customer gain from a program that gets better as the cost rises? Basic, Better, Best. Detroit Air Compressor offers one program: BEST. Offering the finest in preventative maintenance and service. Without the smoke and mirrors of proprietary and computerized systems.

Our approach is HANDS ON!

A Complete Solution

The AIRnet compressed air piping system is a complete solution from source to production thanks to its high quality aluminium pipes, its range of aluminum and polymer fittings from Ø20 - 80 mm (¾” - 3”) and variety of specialized tools, brackets and bushing.

Design of the main ring and distribution lines

The main ring is often the main skeleton of a network. This loop is located close to the main point of use, with drop legs connecting the main ring to your point of use, ensuring a minimal pressure drop. Using a main ring, the pressure drop is twice as low as when using a straight distribution line of the same length. In general, the main ring’s diameter is based on the capacity of all compressors connected to the network, and should take possible future extensions into account.

A distribution line is usually preferred to connect the main ring to a single point of use which is isolated in a remote location. The diameter of the distribution line should be based on the air demand at this specific point of use.

cross ring lines are distribution lines which connect the opposite sections of the main ring to guarantee a minimal pressure drop in other locations than the main point of use.

The Hoffman® Revolution, a new line of high speed centrifugal blowers using break-through technologies, is designed as the world’s most advanced energy management blower system. The first in this family of blowers, the R-200 and R-300 are capable of flows from 2,500–8,500 CFM and pressures from 3–15 PSIG.

The Revolution takes performance and power savings to new heights of effciency, reliability and control. Designed, built and tested in the United States, this breakthrough high speed centrifugal blower incorporates an infinite life cycle magnetic bearing driven by a permanent synchronous magnetic motor (PMSM) with a variable frequency drive (VFD).

The ROOTS™ RAM™-DPJ WHISPAIR™ rotary blower has an exclusive discharge jet plenum design which allows cool, pressurized system air to flow into the cylinder. This unique design permits operation at high pressure levels with a single stage unit. The RAM high pressure blower is designed for continuous operation at discharge pressures up to 30 psig. It has no valves, vanes or Teflon rings. Clean, dry discharge air or gas provides usable heat for your process.

  • Single stage operation to 30 psig
  • No valves, vanes or Teflon rings to wear
  • Alloy steel timing gears
  • Cylindrical roller bearings
  • Piston ring air seals
  • Lip-type oil seals (optional mechanical seal)
  • Splash oil lubrication
  • Horizontal and vertical configurations available
  • Pressure to 30 psig (2068 mbar)
  • Flows to 545 cfm (926 m3/hr)

Features

  • Rigid cast iron cylinder and headplates
  • Anti-friction ball bearings
  • Splash lubricated spur timing gears
  • Inlet and discharge connections in standard pipe sizes
  • Involute profile ductile iron impellers

Engineering Resources

Vacuum curves: dvjwhispairmax_drwg_vcurve_imp.pdf,
Dimension drawings: dvjwhispairmax_drwg_dimensions_imp.pdf,
Assembly drawings: dvjwhispairmax_drwg_assembly.pdf,
parts lists: dvjwhispairmax_tab_partslist.pdf

Operating Principle

Incoming air is trapped between the impellers. Simultaneously, pressurized air is being discharged. As the upper impeller passes the jet plenum, cooled, pressurized air flows into the space between the impeller and cylinder. This cools the trapped air, helps control thermal growth and allows higher discharge pressures.The trapped air is then moved into the discharge flange (left). Backflow is reduced, resulting in lower operating noise level and reduced shock loading on the impellers.

dvj_princ_op.pdf

RCS-J WHISPAIR™ rotary blowers are heavy-duty units designed with integral-shaft ductile iron impellers having an involutes profile. WHISPAIR blowers reduce noise and power loss by utilizing an exclusive wraparound plenum and proprietary WHISPAIR jet to control pressure equalization – feeding back flow in the direction of impeller movement, thereby aiding rotation. The head plates, gear cover, drive end cover and rigid, one-piece casing are gray iron. Carburized and ground alloy steel spur timing gears are taper mounted on the shafts, secured with a locknut. Cylindrical roller bearings are used. Piston rings reduce air leakage through the shaft openings in the head plates, and lip-type oil seal prevent lubricant from entering the air chamber. The RCS-J incorporates thrust control, with splash oil lubrication at both ends of the blower. Frame sizes 715J and 721J are designed with detachable rugged steel mounting feet that permit in-field adaptability to either vertical or horizontal installation requirements.

RCS-J Blowers
Incorporates ROOTS Whispair technology to reduce noise levels.

RCS-VJ Blowers
RCS Whispair units are available with an inlet spray nozzle and seal water flow meter for water injection.  This feature cools the vacuum unit to enable it to reach deeper vacuum.

Companies don’t always consider the true cost of compressed air. They may consider the actual cost of the air compressor itself, but rarely is the cost of running that machine taken into account. As a result, many compressed air systems operate inefficiently, potentially costing a business thousands of dollars.

A compressed air audit from Detroit Air Compressor will allow you to accurately assess the cost of running your machine, as well as identify areas in which you can streamline and improve the efficiency of your system to save your company money.

Contact Detroit Air Compressor to have one of our compressed air system specialists visit your site to perform a thorough and complete audit of your entire compressed air system.

Hankison International is dedicated to supplying the best value in compressed air treatment products. Hankison products range from point-of-use filters and condensate drains to high capacity refrigerated and desiccant dryers. Whether for a large manufacturing plant, a hospital or a small business such as an auto repair shop, Hankison products ensure a constant supply of cool, clean, dry compressed air.

Refrigerated Compressed Air Dryers

Hankison refrigerated compressed air dryers come in a variety of configurations that include: standard standalone units up to 500 scfm; air treatment stations with integrated dryer, filter, and drain system; energy-saving designs; high volume systems to 2000 scfm; and high temperature and high pressure systems.

Desiccant Dryers

Hankison desiccant air dryers come in a variety of configurations and capabilities to ensure consistent outlet dew points with long desiccant life. Models available include: heatless regenerative dryers; heated purge designs; blower purge regenerative dryers; and single tower dryers.

Membrane Dryers

HMM Series Modular Membrane Compressed Air Dryers The HMM Series Modular Membrane dryers offer clean, stream lined installations and reliable operation while providing dew points from -40°F to +40°F, -40°C to +5°C.

  • Water vapor passes through permeable membrane walls, lowering the dew point.
  • Light weight units can be installed in piping without additional support.
  • Works without moving parts, consumables or external power source.
  • Constructed of non-rusting parts that are suitable for indoor, outdoor and severe environments.

Coalescing Filter Products

Hankison offers a choice of compressed air filters, centrifugal and impaction type water separators, mist eliminators to remove oil and water aerosols from a compressed air system, and high temperature desiccant dryer after-filters for solid particle removal.

<< Start < Prev 1 2 3 4 5 6 Next > End >>
Page 1 of 6


(800) 884-4184 or (248) 544-2982