We are standing by ready to serve you. We have the know-how, experience and tools to do the work right. We service ALL brands and provide installation services for our products.
Detroit Air Compressor is very proud of its Preventative Maintenance Program.
The paradigm of measuring compressor service requirements based upon time only has been replaced by adding the elements that affect the air compressor’s operation and performance. This system developed by Detroit Air Compressor has saved many customers thousands of dollars in avoidable repairs.
The DACO ADVANTAGE PROGRAM:
- Scheduled visits based upon site conditions
- Oil samples taken at prescribed intervals
- Compressor maintenance is performed per manufacturer’s recommendations
- Dedicated service technician staff
- All service calls received and dispatched 24 hours a day/7 days per week
This method has REDUCED maintenance costs for many of our customers. Call today to learn about this energy saving economical service!
Be cautious of “all expenses paid” programs offered by some of our competitors! Our experience has shown that these programs are expensive and benefit the seller, not the buyer. Be aware of proprietary remote monitoring systems that allow ONLY the selling company access to the information. Some customers have been charged high access fees for this “service”, only to be told that they owe additional fees to have the service activated. The end result… the system was never initialized.
What benefit does the customer gain from a program that gets better as the cost rises? Basic, Better, Best. Detroit Air Compressor offers one program: BEST. Offering the finest in preventative maintenance and service. Without the smoke and mirrors of proprietary and computerized systems.
Our approach is HANDS ON!
A Complete Solution
The AIRnet compressed air piping system is a complete solution from source to production thanks to its high quality aluminium pipes, its range of aluminum and polymer fittings from Ø20 - 80 mm (¾” - 3”) and variety of specialized tools, brackets and bushing.
Design of the main ring and distribution lines
The main ring is often the main skeleton of a network. This loop is located close to the main point of use, with drop legs connecting the main ring to your point of use, ensuring a minimal pressure drop. Using a main ring, the pressure drop is twice as low as when using a straight distribution line of the same length. In general, the main ring’s diameter is based on the capacity of all compressors connected to the network, and should take possible future extensions into account.
A distribution line is usually preferred to connect the main ring to a single point of use which is isolated in a remote location. The diameter of the distribution line should be based on the air demand at this specific point of use.
cross ring lines are distribution lines which connect the opposite sections of the main ring to guarantee a minimal pressure drop in other locations than the main point of use.
Companies don’t always consider the true cost of compressed air. They may consider the actual cost of the air compressor itself, but rarely is the cost of running that machine taken into account. As a result, many compressed air systems operate inefficiently, potentially costing a business thousands of dollars.
A compressed air audit from Detroit Air Compressor will allow you to accurately assess the cost of running your machine, as well as identify areas in which you can streamline and improve the efficiency of your system to save your company money.
Contact Detroit Air Compressor to have one of our compressed air system specialists visit your site to perform a thorough and complete audit of your entire compressed air system.
Detroit air compressor has a large inventory of rental air compressors ranging from 7 ½HP and up. We also rent air receivers, dryers, hoses and electrical hookups.
Detroit Air Compressor is a master distributor for:
- Travaini Vacuum Systems
HAVING TROUBLE FINDING AIR PARTS?
WE HAVE THE ANSWER!!
CALL DETROIT AIR COMPRESSOR AND TOLEDO COMPRESSOR COMPANY’S AIR PARTS EXPRESS AT 800–884-4184
Air Parts Express has those hard-to-find parts for air compressors, dryer, filters, blowers, heat exchangers and vacuum pumps, from 5 hp and up. We carry parts for many brands:
Atlas Copco Bauer Campbell Hausfeld Compair
Curtis-Toledo DeVilbiss Emglo Gardner Denver
Hankison Haskel Ingersol Rand Joy
Kaeser Kellogg Lamson Leroi
Motivair Nash Norgren Quincy
Roots R.P. Adams Saylor Beall SpeedAire
Stoddard Sullair Thermal Transfer Travaini
Ultra Filter Worthington Graham White Zurn
which includes a wide variety of parts, such as:
Air receiver tanks Aftercoolers Bearings Crankshaft
Elements Filters Gaskets Intercoolers
Lubricants Pistons Rings Seals
Switches Thermostats Valves Wipers